Only 70 mm height
One-way installation even in confined spaces and on narrow profiles.
Free choice of mounting type
The ETS 42-R enables all mounting types with one drive.
A practical example:
The fitter only realizes on site that the installation should not be on the hinge side, but on the opposite hinge side. Normally this means: back to the company, get another door closer, back to the construction site.
With the ETS 42-R, this is not necessary, as it enables all mounting types with the same drive. This keeps the fitter flexible - and storage costs low.
One-way parameterization
Teach, set, adjust, adapt and change everything directly on the drive.
Remote diagnosis? -None of your problems!
Without any additional hardware.
One drive - all functions
The ETS 42-R already has everything on board - and doesn't need any annoying upgrade cards.
- Integrated wind load function
- Various airlock functions
- Assisted manual opening
through servo function - Manual release
- Full power and low energy
Full power is preset, other settings are implemented, no upgrades necessary
The ETS 42-R has it all under the hood:
It simply looks
good.
- Only 70 mm height
The low ETS 42-R is the first choice when low ceiling heights above the door or the profile of the tubular frame door only offer limited space. - High-quality Stainless steel design
It therefore fits in with the continuous stainless steel concept of our system technology.
It can be easily assembled
.
- For all mounting types
This creates freedom on the construction site and more space in the warehouse: you can cover all* mounting types with just one drive. - Always including mounting plate
This makes work on site much easier: Mount the mounting plate in the desired position, then simply screw on the drive.
It comes with extensive software.
- One-wayparameterization
via our proven joystick display team - without a control unit or laptop - Integrated wind load function
- Assisted manual opening
through servo function - Program selector switch on the side cover
can be easily extended via a Bedix
- Feedback to a fire alarm control panel
Floating outputs - Freedom with operating elements
All pulse transmitters are possible: from One-way light switches to modern access control systems - Full Power and Low Energy
Full Power is preset, other settings are implemented, no upgrades necessary - One-wayreset after a fire alarm
via the reset button on the side cover
Performance criteria
| Closing force | EN 2 - 5, for doors up to 150 kg, with fire protection / smoke protection requirements |
| Dimensions, weight | height 70 mm, width 730 mm, depth 125 mm, weight 8.2 kg |
| Ambient temperature | - 15 to + 50° |
| Max. relative humidity | 85% |
| Protection class | IP 20 |
| Operating voltage | 230 VAC, 50 Hz, 10 / 13 A |
| Power consumption | max. 350 W |
| Output power | 24 VDC, max 1.4 A |
| Lintel depth | max. 250 mm (SGS), 150 mm (GS) |
| Door opening angle | max. 105° |
| Hold-open time | 0...60 s / 0...180 s |
| Slam damping | currentless, continuously adjustable (potentiometer) |
| Functions | servo support, push & go, low energy, wind load compensation |
| Design | cover hood stainless steel, matt brushed |
| Tested acc. to | DIN18650DIN18263-4 EN 1158 EN 1634-1 EN 16005 F |
Downloads
ETS 42-R
Assembly instructions
More Downloads
Assembly drawings
(.dwg)
