Escape security with smoke/heat ventilation requirements (RWA)
In projects there are many challenges, especially if exit security with smoke/heat ventilation requirements and security must be combined. The new FTA ECO-Vent meets all these challenges in a unique system.
The smart solution for your smoke/heat ventilation requirements
- Supply ventilation opening for natural smoke and heat extraction systems with standard door elements; with the highest level of access comfort
- Standard-compliant and compact
- Cost-effective and time-saving
- Opening angle of 90 degrees
1ECONewton door closer TS-62
2Flap drive FTA 600 R
Explanatory film - FTA ECO-Vent
The FTA ECO-Vent FTA, great in combination fulfills 3 functions
This product can be assembled on escape route doors with smoke/heat ventilation and also fulfils the escape route and the automatic opening as well as the normal door function as per DIN SPEC 1104.
It works in daily operation as an easy opening door closer with the highest level of access comfort.
In case of panic, the panic function is not impaired, and the door can be mechanically closed by the choreography of the door closer and the chain drive, even in the event of an alarm.
Smoke extraction system
in case of fire it works like a smoke extraction system.
Smoke extraction concept
For smoke extraction concepts based on natural uplift principles, precisely trimmed opening of doors and windows is necessary to ensure that poisonous gases escape from the building as quickly as possible. Over a certain period, this produces stable, low-smoke air layers near the floor that allow people to escape by themselves, thus saving many lives. Smoke extraction also makes the fire brigade’s job more efficient and prevents or at least delays the dreaded flash-over, in which pyrolysis gases can ignite suddenly.
2Emergency button for smoke extraction
7Smoke / heat vent control
Installation is only achievable on the hinge-opposite side.
FTA ECO-Vent Highlights
Escape route and smoke/heat ventilation
Further information can be found on our product page
ECOmount: Time- and cost-saving installation through interior assembly of the door closer and folding arm drive.
ECOuniq: Unique – every component on the same side. Door closers and FTA are fitted at the same level in the
inside of the door only.
ECOvalve: Simple, high-precision and permanently secure adjustment of all parameters of the closing process
using a standard Allen key.
ECOcover: The entire product is covered with an elegant stainless-steel cover.
ECOupgrade: Easy retrofitting in one product. No floor-based door closer or concealed door closer required.
ECOScrew: The advantages compared with conventional cross-head and slotted-head screws include a higher
torque. Torx minimises wear, low risk of driver slipping, thus minimised damage to components.
ECO2in1: This product can be assembled on escape route doors with RWA ventilation and also fulfils the
escape route and the automatic opening as well as the normal door function as per DIN SPEC 1104.
AumüllerStecker: Contains a strain relief according to DIN EN 60335-1 is also torsion-proof and the snap-in hooks prevent the plug from being pulled out. This plug is compatible with all Aumüller products.
Your FTA ECO-Vent direct contact
Do you have a concrete question? Or are you interested in further information? Please contact our ECO Schulte fair team. Use the contact form to the right or get in touch via telephone or e-mail.