ECO SR EFR-1S III

Surface-mounted Slide rails 2-leaf

ECO SR EFR-1S III – Door coordinator with electromagnetic hold-open device in the fixed leaf

  • Hold-open point of the active leaf/fixed leaf: Active leaf: approx. 70º to 145º (only with ECO SR-EF-2), Fixed leaf: 70º to 130º
  • Control via: Connection: 24 V DC
  • Minimum size of fixed leaf: 360 mm (for TS 41) or 400 mm (for TS 61)
  • Delivery: Incl. corresponding cover profile, without lever arm, which is part of the door closer
  • Installation of the system: Only on the hinge side.
  • For full panic doors, the ECO MK 1 driver flap must be used!
  • Door coordinator: Ensures that the closing sequence of the stationary and active leaves takes place in the prescribed order, i.e. the active leaf always closes after the stationary leaf.
  • Electromagnetic hold-open device: ECO SR-EF-2: In the active and passive leaves. When the active leaf is opened, it is held in place by an electromagnetic hold-open device. If the passive leaf is also opened, it is also held in place by an electromagnetic hold-open device. At the same time, the integrated door coordinator is activated,
  • which locks the active leaf. The active leaf magnet switches off and both door leaves remain open.
  • ECO SR-EF-1S: In the fixed leaf. The active leaf is not held separately by a hold-open device. If the fixed leaf is also opened,
  • it is held by an electromechanical hold-open device and the integrated door coordinator is activated. This now also locks the active leaf
  • in any desired position (70-145°). This means that both leaves can remain open during operation (IBO).
  • Tested in accordance with: EN 1155 and EN 1158.

The ECO SR EFR III slide rail is available in 2 versions:

  • ECO SR EFR III DIN-L
  • ECO SR EFR III DIN-R
Colors and materials
Standards

Direct installation
Adaptation profile
Standard profile

Cable schema - ECO EFR III (Compatible only with Adobe Acrobat Reader version 9.1 or later)
Cable schema - ECO SR-EFR III (Compatible only with Adobe Acrobat Reader version 9.1 or later)
Wiring FSA III with HAT + DRM