ECO Newton TS-41

 

ECO Newton TS-41

Closing force 1–4 according to EN - CS, LS, ÖD (fixed)

Closing force size 1–4, tested acc. to EN 1154 (for door widths up to 1,100 mm), continuously adjustable. Latching speed and closing speed freely adjustable at the side. Constant back-check. Same model for DIN L/R. Depth only 41 mm. Weight: 1,380 g. Max. door opening angle: 180 ° 

  • ECOunity: The ECO Newton door closer portfolio covers all door dimensions with only two basic units. One model for all four mounting types
  • ECOphysis:  Door closer and slide rail form a positive-fit unit in aluminium and stainless steel
  • ECOclic: Stainless steel cover encloses the aluminium body with the strength of spring steel, thus concealing all setting parameters safely against unauthorised access
  • ECOvalve: Simple, high-precision and permanently secure adjustment of all parameters of the closing process using a standard Allen key
  • ECOcover 2 : Optional stainless steel cover for the ECO Newton door closer or slide rail. Order the lever arm in stainless steel for a harmonious overall appearance.
  • ECOgreen: Intelligent design and carefully planned use of materials significantly help save resources
  • ECOline: Slide rail and door closer are flush when completely installed. All materials are perfectly colour-matched – right through to the end caps on the slide rail K.
  • ECOvario: Permits the use of all slide rail door closers and can even be combined with different door leaf widths. In this way, an optimum price-performance ratio can be found for every individual door situation.

New overall packaging: TS-41 B: (Installation as per DIN hole group) Complete set incl. door closer body, slide rail B, square lever B, mounting plate, mounting instructions, paper template and fixing accessories.<br/> TS-41 K: (Direct installation) Complete set incl. door closer body, slide rail K, square lever K, paper template and fixing accessories)

Applications for the ECO Newton TS-41

The ECONewton TS-41 is designed for light to medium functional doors (EN 1154 size 4) and is used wherever elegant design, functionality, ease of opening and cost-conscious construction are required. Closing speed and latching speed can be freely adjusted, the back-check (from 70° door opening) is already pre-installed in every closer.

With its new gearing design, the ECONewton TS-41 achieves a high degree of efficiency, which strikes the ideal balance between opening and closing. The forces which arise when a door is opened are reduced to a minimum, without any compromises on the reliability of the door closing. For the user, this means that distinctly less torque is required to open a door in comparison to other similar door closers. This makes the ECONewton TS-41 the perfect problem solver for standard and special-function doors, especially for clinics, care homes, kindergartens and schools.<br/> <br/> The ECONewton TS-41 complies with DIN 18040 (construction of accessible buildings with requirements for highly efficient smooth-running doors). The maximum opening torque at closing force EN 4 is only about 37 N m (the DIN 18040 standard requires a maximum of 47 N m).<br/> <br/>  

Extracts from DIN 18040-1:2010-10

4.3.3.3 Requirements for the design of the door
It must be possible to open and close doors, even with a low application of force (max. 25 N m), otherwise, automatic door systems are required, see DIN 18650-1 and DIN 18650-2, according to table 1 in this standard, from line 12. If door closers are required, then they must be set so that the opening torque does not exceed size 3 according to DIN EN 1154 (max. 47 Nm).

It is recommended to use door closers with continuously adjustable closing force.
So that people with restricted mobility have enough time to pass safely through the door, delayed action in the door closer may be necessary.
For fire and smoke control doors, hold-open systems (e.g. holding magnets or a free swing door closer) should be used.

Materials
Standards
Auszeichnung

Direct installation with GS B
Direct installation with GS B + MoPla
Direct installation with GS K
Direct installation with GS K + MoPla
Adaptation profile with GS-B + MoPla
Adaptation profile with GS-K + MoPla

Direct installation with GS B
Direct installation with GS B + MoPla
Direct installation GS K
Direct installation GS K + MoPla
Lintel bracket with GS B
Lintel bracket with GS K