FTA ECO-Vent II - when people need to get out quickly - and so does the smoke.
In hazardous situations, building doors must reliably meet a wide range of requirements. If escape route protection needs to be combined with smoke/heat extraction (SHEV), our new FTA ECO-Vent II is the perfect and safe solution.
Smoke extraction concepts save lives
Smoke extraction concepts based on natural buoyancy forces require doors and windows to be opened in a precisely coordinated manner - this is the only way to allow toxic smoke gases to escape from the building as quickly as possible.
This creates largely stable, low-smoke layers of air close to the ground for a certain period of time, which enable an escape under its own power.
Supply air opening for natural smoke and heat extraction systems with standard door elements
- Standard-compliant and space-saving
- 90° opening angle
- Cost-effective solution in comparison
- for the use of automatic doors
The drive roller of the folding lever runs on the guide rail of the door closer - without a fixed mechanical connection
- Escape option is guaranteed at all times
- Time and cost savings thanks to the unique internal
- Installation of door closer and folding lever drive Installation of both components on the same level
Use of standard components
- Simplifies warehousing
- Reduces operating and maintenance costs
Networking option
- Compatible with all Aumüller products - as well as all other common RWA system providers
3 functions in one system:
- In day-to-day operation, it functions like a normal door closer with maximum ease of access, in the event of panic like an escape route opener and in the event of smoke extraction like a RWA opener.
Safe - even for the emergency services
Pos. | Equipment |
---|---|
1 | FTA ECO-Vent II |
2 | RWA roof hatch |
3 | Smoke detector |
4 | RWA control |
Smoke extraction also makes the work of the fire department more efficient, as it prevents or delays the dreaded flashover, in which pyrolysis gases ignite abruptly.
Escape door to the staircase
Application recommendation
Pos. | Equipment |
---|---|
1 | FTA ECO-Vent II |
2 | Protective fitting K-160 Guardian EPN 2000 III |
3 | Motorized lock |
4 | OBP-20 Roller conveyor |
5 | Cable transition |
6 | RWA Control |
7 | RWA Emergency button |
8 | Code keypad |

The perfect solution for smoke extraction at the escape door.
ECOmount
The internal installation of the door closer and folding lever drive saves time and money.
ECOuniq
All components are located on one side. This means that door closers with FTA can be installed in one level on the inside of the door only.
ECOvalve
All parameters of the locking process can be set easily, precisely and permanently securely using a standard Allen key.
ECOcover
The entire component with door closer and FTA is covered by a stainless steel cover
ECOupgrade
The product can be easily retrofitted as a whole. Floor springs or integrated door closers are not required.
ECOScrew
The Torx drive allows a higher torque than conventional Phillips and slotted screws. Wear and the risk of slipping are minimized and the risk of damage is reduced.
ECO2in1
When installed on escape doors with SHEV openings, the FTA ECO-Vent simultaneously enables the escape route and automatic opening as well as the normal door function in accordance with DIN SPEC 1104.
Aumüller Plug
The plug is compatible with all Aumüller products. It has strain relief in accordance with DIN EN 60335-1, is twist-proof and the latching hooks prevent the plug from being pulled out.
Product information
Your dedicated building management contact

Looking for comprehensive, practical advice? Send us a quick message and we will get back to you as soon as possible.