Door closer technology

ECO Newton TS-62 G

Closing force 2 – 5 tested acc. to EN 1154 A

(for door width up to 1.250 mm) continuously adjustable. Latching speed,

closing speed and back-check continuously adjustable. Delayed action as

option. Same version DIN left and DIN [...]

ECO Newton TS-61

Closing force 5-6, tested acc. to EN 1154 A (for door width up to 1.400 mm) continuously adjustable. Latching speed, closing speed and back-check continuously adjustable. Same version DIN left and DIN right. Mounting height with [...]

ECO Newton TS-61

Closing force 2-5, tested acc. to EN 1154 A (for door width up to 1.250 mm) continuously adjustable. Latching speed, closing speed and back-check continuously adjustable. Delayed action as option. Same version DIN left and DIN [...]

ECO Newton TS-61 G

Closing force 2-5, tested acc. to EN 1154 A (for door width up to 1.250 mm) continuously adjustable. Latching speed, closing speed and back-check continuously adjustable. Delayed action as option. Same version DIN left and DIN [...]

ECO Newton TS-51

Closing force 1- 4, tested acc. to EN 1154 A (for door widths up to 1.100 mm) continuously adjustable. Latching speed, closing speed and back-check continuously adjustable. Same version DIN left and DIN right.Mounting height with [...]

ECO Newton TS-41

Closing force 1- 4, tested acc. to EN 1154 A (for door widths up to 1.100 mm) continuously adjustable. Latching speed and closing speed continuously adjustable. Back-check constant. Same version DIN left and DIN right.Mounting [...]

ECO Newton TS-15 K

Closing force 1 / 2 acc. to EN (for door width up to 850 mm)

• Latching speed and closing speed continously adjustable from the side
• Same version DIN left and DIN right.
• Height only 38 mm
• Max. door opening angle: 180°
• New [...]

Slide rail with mechanical locking device (GS B-FKL) for ECO Newton TS-61, TS-51, TS-41*, TS-31* and Multi-Genius (surface mounted).

Hold-open angle adjustable from approx. 70° to 150°. For surface fixed.

This version can be achieved afterwards by [...]

EF

Slide rail with electromagnetic hold-open for ECO Newton TS-61, TS-41 **

• Controlled by: External fire alarm system.
• Hold open angle: Approx. 70° to 145°
• Power consumption in hold-open position:
Supply voltage 24 V DC, max. 1 W.
• Scope of [...]

EF BG (Hinge-opposite side)

Slide rail with electromagnetic hold-open hinge-opposite side for ECO Newton TS-61 G, TS-41 **

• Controlled by: External fire alarm system.
• Hold open angle: Approx. 80° to 110°
• Power consumption in hold-open position:
 [...]

EFR BG (Hinge-opposite side)

Slide rail with continuous cover, electromagnetic hold-open, integrated smoke detector with optical pre-information about dirt level and automatic calibration to avoid false alarms for ECO Newton TS-61 G, TS-41 **

• Com [...]

SR

Closing sequence selector hinge side for ECO Newton TS-61, TS-41 **

• Hold open angle for active leaf: at 160°-175°, an additional assembly work is necessary
• Hold open angle for passive leaf: max. 175° (depending on the fold-and frame geometry)
 [...]

SR BG (Hinge-opposite side)

Closing sequence selector hinge-opposite side for ECO Newton TS-61 G, TS-41 **

• Hold open angle: max. 115° (depending on the fold-and frame geometry)
• Minimum size passive leaf: 500 mm.
  • Delivery / Order: Incl. arm [...]

SR-EF-2 BG (Hinge-opposite side)

Closing sequence selector with electromagnetic hold-open in the passive leaf for ECO Newton TS-61 G, TS-41 **

• Hold open angle for passive leaf and active leaf Active leaf: Approx. 80º to 110º, Passive leaf: 80º to [...]

SR-EFR-2

Closing sequence selector with continuous cover, two electromagnetic hold-open in the active and passive leaf, integrated smoke detector with optical pre-information about dirt level and automatic calibration to avoid false alarms for ECO N [...]

SR-EFR-2 BG (Hinge-opposite side)

Closing sequence selector with continuous cover, two electromagnetic hold-open in the active and passive leaf, integrated smoke detector with optical pre-information about dirt level and automatic calibration to [...]

ECO Newton TS-50 (1-5)

Closing force 1 - 5,  tested acc. to EN 1154  (for door widths up to 1.250 mm) continuously adjustable. Latching speed and closing speed continuously adjustable. Back-check constant. Same version DIN left and DIN right. [...]

ECO Newton TS-20

Closing force 2 / 3 / 5, tested acc. to EN 1154 A (for door widths up to 1.250 mm) adjustable by moving the door closer. Latching speed and closing speed continuously adjustable. Back-check constant. Same version DIN left and DIN [...]

ECO Newton TS-15

• Closing force 2 / 3 / 4 / 5 acc. to EN (for door width up to 1.250 mm) Adjustable by moving the door closer on the door frame.
• Latching speed and closing speed continously adjustable from the side
• Same version DIN left and DIN [...]

ITS MULTI GENIUS

• By turning the micro-hydraulic damping unit, the Multi-Genius can be used as both concealed system (ITS) or surface-mounted door closer system.
• ITS Multi-Genius for use in wooden doors, profi le frame doors made of [...]

FTS-63 R

• The free-swinging function is activated by locking the arm when opening once
• Integrated smoke detector
• Opening angle, depending on notch of the door: 85° – 115° (115° – 155° on request)
• Power supply 230 V AC
• Closing force, closing [...]

ETS 64-R

The new ECO ETS is a powerful, silent, electric motor drive for heavy interior and exterior doors with a weight of up to 250 kg.

Closing force EN 4 – 6

Versions and functions:

• Slide rail push (hinge side) and pull (opposite hinge side)
• Rack [...]

ECO Mount – Mounting plate for ECO Newton TS-51

with DIN EN holes

Acc. to EN 1154, supplemetary sheet 1.

ECO Mount – Mounting plate for ECO Newton TS-41, TS-31, TS-50

with DIN EN holes
After mounting the sides of the mounting plate
are still visible.

Acc. to EN 1154, supplemetary sheet 1. Only with slide rail B and TS-50

ECO Mount – Mounting plate for ECO Newton TS-20

with DIN EN holes

Acc. to EN 1154, supplemetary sheet 1.

Arm for slide rail B

Arm for slide rail K

Slide rail K for ECO Newton TS-41, TS-31 and TS-15 K

For surface fixed.

Use in fire-protection only with ECO Newton TS-41 and TS-31. Slide rail is tested acc. to EN 1154 A.

Delivery includes lever arm K.

Hold-open arm

The hold-open offers an additional hold-open function to fix the door. Steel zinc-plated. Hold-open angle 70° - 130°. Hold-open force adjustable.

Not allowed for the use on fire-protection doors.

Panic flap MK Basis

The closing squence ensures that the active and passive leaf are closing in the correct order, e.g. the passive leaf first, active leaf last. The function of the closing sequence is only given if the active leaf is opened up to a [...]

Adaptor for arm 13 mm
ECO Newton TS-61/51

In order to extend the distance between door closer and slide rail by 13 mm.

• Use in connection with ECO adaptor profile
• Delivery contains extended screw.
• (for short passive leaf)

Complete set tandem door closer (EN 7 – 8)

Consisting of 2 x ECO Newton TS-61 (5 – 6)

• incl. mounting platte
• 1 x Arm,
• 1 x Slide rail B,
• 1 x Accessories set Tandem

Under-lintel angle for slide rail B and K

For standard mounting installation of the slide rail on hinge-opposite side for doors with deep door lintels. Under-lintel angle made of aluminium.

Under-lintel angle for door closers with slide rail / standard arm

For head mounting of the door closer on hinge-opposite side for doors with deep door lintels. Under-lintel angle made of aluminium.

Axis bolt extension FTS (ADV)

Accessories ADV for lengthening of the distance from the lever to the guide roller (eg, for mounting FTS on the steel frame).

Extension 20 mm.

Accessories set SR-FKL BG

Mechanical hold open for belated assembly in slide rail SR BG. Not permitted for use in fire protection. 30 x 21 mm. Hold open angle from max. 110° adjustable. For exterior doors under wind load and heavy doors, the holding [...]

Accessories set MOL I slide rail Basis *

Mechanically adjustable opening limit for the slide rail B (Basis)  The opening angle can be locked by moving the MOL in the slide rail. 30 x 20 mm.

* NOTE!
To be used on light interior doors only. Normal [...]

ECO pivot hinge 31

Pivot hinge with stainles steel cover (TS-31 body empty, without spring and oil), mounting plate, arm (long) with four edges. Pivot hinge for combination with closing sequence FDC-B

ECO RSZ

External smoke inducting system for use with ECO hold open devices EF, EF-BG, SR-EF, SR-EF-BG, IS-EF and IS-SR-EF. Scope of delivery: smoke detector, power supply unit, interrupt button and continuous cover.

• Input voltage: 230V AC, 21 VA
 [...]

RSZ Standard

Smoke inducting system. Scope of delivery: Smoke switch ORS 142, power supply unit NAG 02 and continuous cover.

For controlling external electromagnetic door retainer.

Smoke switch ORS 142 W - Standard

• Function: Scattered light
• Alarm level smoke acc. to EN 54 part 7
• Release temperature: 70 ± 5° C
• Supply voltage: 18 to 24 VDC
• Power input: at 28 VDC Max. 22 mA
• Degree of protection: IP 42
• Ambient [...]

DKT 01 ge

Manual interrupt button for closing sequence selectors.
An unintended closure of the door shall be avoided.

• Contact: Directional contact
• Switch voltage: Max. 30 VDC
• Switch flow: Max. 1 A
• Degree of protection: IP 20

ORS 142 - Smoke switch

• Smoke detection: acc. to EN 54, part 7,
• Temperature: 70°C
• Supply voltage: 18 – 28 V DC
• Power input: at 28 V DC, at rest 22 mA,
  at an alarm 11 mA, at a disruption 16 mA,
• Relay contact:  Opener
• Switch voltage: 30 V DC
•  [...]

ORS 142 Set

For optional line monitoring according to DIN EN 14637.

Set consists of:

• 2 x ORS 142
• 2 x Mounting plate 143 A
• 1 x Terminating resistor AM 142

ORS 143 A - Mounting plate for ORS 142

For installation of smoke switch ORS 142 on-wall.

ORS 143 AF - Mounting plate for ORS 142

For installation of smoke switch ORS 142 on-wall in moist rooms.

ORS 143 UH - Mounting plate for ORS 142

For installation of smoke switch ORS 142 in hollow ceilings.

Electromagnetic door retainer THM 425/THM 425-1

• Rated operating voltage: 24 VDC
• Power input: 63 mA
• Power consumption: 1,5 W
• Duty rating: 100%
• Degree of protection: IP 40

Electromagnetic door retainer THM 433/THM 433-1

• Rated operating voltage: 24 VDC
• Power input: 63 mA
• Power consumption: 1,5 W
• Duty rating: 100%
• Degree of protection: IP 40

Electromagnetic door retainer THM 439 with swinging head

• Rated operating voltage: 24 VDC
• Power input: 63 mA
• Power consumption: 1,5 W
• Duty rating: 100%
• Degree of protection: IP 40

Anchor plate AFS 55 - Flexible armature
suitable for THM 413, 433, 439 and 440

• Anchor plate: Ø 55 mm x 5 mm
• Angular freedom: ± 60°

Anchor plate AFS 65 - Flexible armature
suitable for THM 425, 425-1, 433-1

• Anchor plate: Ø 65 mm x 5 mm
• Angular freedom: ± 60°

Anchor plate AFS 75 - Flexible armature
suitable for THM 425, 425-1, 433-1

• Anchor plate: Ø 75 mm x 5 mm
• Angular freedom: ± 60°

Anchor plate ATS 75 - Telescopic anchor
suitable for THM 425, 425-1 and 433-1

• Anchor plate: Ø 75 mm x 5 mm
• Swept volume: 20 mm

Anchor plate ASS 55
suitable for THM 413, 433, 439 and 440

• Anchor plate: Ø 55 mm x 5 mm
• Rubber-based support: 8 mm
• Angular freedom: 20°

Anchor plate ASS 65
suitable for THM 425

• Anchor plate: Ø 65 mm x 5 mm
• Rubber-based support: 8 mm
• Angular freedom: 20°

ECO Test gas P-250

Test gas for operation test (simulating the smoke detection) of the smoke switches / smoke buttons. Free from halogenated carbon hydride (FCKW or other).

Mounting plate for ETS (MPL)

Necessary for fire-rated doors as well as mounting on brickwork and small frames.

Door stop for ETS (OA)

Will be mounted as additional mechanical door stop and can be used with standard or slide arms (not possible in combination with short shims and low-level installation).

Casing for double-leaf doors

Casing / connecting piece for sequence selectors for double-leaf doors. The casing will be cut on site and will be mounted between the two ECO ETS (Electric motor door closer). Consists of casing and fixing material. [...]

Relay board (RSP)

Relay print (plug board) for retrofitting to the control of ETS. 4 freely configurable relays for control of acoustic or optical signal generators or the signaling of the door status (e.g. open, close, locked, error)

• Later [...]

Dead bolt switch contact (RSK)

Dead bolt switch contact for installation in the closing plate. Switches the power unit off as soon as the lock is mechanically locked. This prevents a failure of the power unit when locking. Includes 6 m cable.

D-BEDIX control device for ETS

The duty type can be chosen directly using D-BEDIX. The most important door settings can be carried out easily. Duty types, menue settings and possible mistakes are clearly represented on the display.

Flip switch (GFT)

• Function: Door “OPEN”
• Supply voltage 250 VAC / 30 VDC
• Current consumption max. 10 AAC / 2 ADC
• System of protection IP 40
• 225x83 mm

Radar 1000 Domino

Radar motion detector which acts as surge generator for automatic doors.

Sensor strip

Active infrared sensor for automatic doors. Secures the pedestrian traffice area. Stops and reverses when detecting obstacles.

• Incl. cable and surface mouted, flexible cable crossover.
• Set I  contains 2 sensor strips for each leaf, to [...]