Handle/knob spindle with longitudinal groove

Handle/knob spindle with longitudinal groove (8 mm)

For knob/lever fittings, the spindle is screwed into the fitting (handle plate/knob) at least 8 mm deep. Do not tighten as this can compromise the function of the counter fitting. This is fixed in place using a grub screw with pin.

The pin cuts into the spindle groove. Positioning required.

Further spindle lengths available on request.

Handle/knob spindle with longitudinal groove (9 mm)

For knob/lever fittings, the spindle is screwed into the fitting (handle plate/knob) at least 8 mm deep. Do not tighten as this can compromise the function of the counter fitting. This is fixed in place using a grub screw with pin. The pin cuts into the spindle groove. Positioning required.

Spindle labelled according to fire protection standard.

Further spindle lengths available on request.