ECO SR-EFR III

 

ECO SR-EFR III

ECO mounting versions – hinge side

Door coordinator with two electromagnetic hold-open devices in the passive and active leaf, and integrated smoke detector with contamination indicator for all ECO Newton door closers.

  • Compatible for connection: DRM ORS 142, TDS 247
  • Controlled via: Integrated smoke detector with power supply unit and automatic calibration to avoid false alarms. Connection: 230 V AC, IP 10, protection rating I
  • Area of application: -15 to +45 °C, relative humidity max. 95%
  • Hold-open point of the active leaf/passive leaf: Adjustable holding force (DIBt recommendation, DIN 18040 and DIN EN 12217: max. 80 N.)
    Adjustable hold-open angle: Active leaf: 80º to 130º, passive leaf: 80º to 130º
  • Minimum size passive leaf: 360 mm (for TS-41) or 400 mm (for TS-61)
  • Delivery: Incl. matching cover profile, without lever arm, this is part of the door closer
  • The use of the ECO MK 1 driver flap is required for full panic doors
  • Installation of the system: Only on the hinge side
  • Slide rails door coordinator: Ensures that the closing sequence of the passive and active leaf is in the prescribed order, i.e. the active leaf always closes after the passive leaf.
  • Electromagnetic hold-open device: In the active and passive leaf. When the active leaf is opened, it is detected electromagnetically. If the passive leaf is also opened, this is also detected electromagnetically. At the same time, the integrated door coordinator is activated and locks the active leaf. The active leaf magnet switches off, both door leaves remain open.
  • Tested according to:EN 1155 and EN 1158 and approved by the DIBt.
Materials
Standards

Direct installation
Adaptation profile
Standard profile

Cable schema - ECO EFR III (Compatible only with Adobe Acrobat Reader version 9.1 or later)
Cable schema - ECO SR-EFR III (Compatible only with Adobe Acrobat Reader version 9.1 or later)
Wiring FSA III with HAT + DRM