ECO is launching the FTS-R III for use as a hold-open system with free swing function. This tested (EN 1155) and approved (DIBt construction type approval) hold-open system consists of the ECO FTS III and the new sliding rail with integrated smoke detector ECO R III. The connection of the free swing door closer to the slide rail can be made internally or surface mounted. 

• For the frame installation variant, there is the combination of ECO FTS III, GS-HF and ECO RSZ III
• For double-leaf applications, the ECO FTS III can be combined with the ECO SR III und ECO SR-R III slide rail. 

Installation variants:
BS = BG, DL = DR, NM and KM

ECO FTS-R III: 
standard installation, DL = DR 
hinge side = opposite hinge side 
ECO FTS III + GS-HF + RSZ III:
frame installation,  
hinge side =  opposite hinge side,  
optional adapter plate 
ECO FTS III + SR-R III + TS-62 (SF):
double-leaf, standard installation,   
hinge side = opposite hinge side,   
ECO FTS III + SR-EFR-1S + TS-62 (SF):
double-leaf with hold-open in the inactive leaf, standard installation,  
hinge side = opposite hinge side

BS = hinge side, BG = opposite hinge side, DL = DIN left, DR = DIN right, NM = standard installation,  KM = frame installation

The flexible problem solver for all doors. The new ECO TS-61 (3-6) will replace the previous ECO TS-61 (2-5) and ECO  TS-61  (5-6) variants.

• Tested according to DIN EN 1154 ​
• EN 3 - 6 (up to sash sizes 1,400 mm)
• With integrated SV as standard (delayed action 120-70°)
• For medium and heavy object doors up to 120 kg
• For heavy doors up to 250 kg (object-related ECO manufacturer's declaration)
• New lever arm 4 mm for better compensation of construction tolerances

Slide-rail for lintel installation

• Assembly advantage: no need for lintel bracket, reduction in screw connections, faster assembly
• Functional advantage: an adjustable opening limiter (ECO ÖB SR III) is already integrated in the ECO GS-STM
• Static advantage: the full-surface support of the GS-STM on the frame (direct installa-tion) prevents the tilting moment in the lintel bracket
• Visual advantage: no visible lintel bracket, no colour differences,no visible screws at the front
• Additional safety: by omitting the lintel bracket, the clear passage height is extended = reduction of the risk of injury

The ITS 630 disappears into the door and is suitable for medium to heavy interior doors as well as for fire and smoke protection doors.

• ITS 630 (3 – 6) acc. to EN 1154 ​
• With back check as standard
• Door leaf width up to 1400 mm, door leaf weight up to 200 kg
• Can be used DIN left and DIN right
• Closing force, latching speed, back check, and closing speed also adjustable after installation
• Compact design: w / h / d = 293 / 40 / 54 mm
• Compatible with the ECO internal slide rail system (IS 12, IS 21, IS-EF, IS-SR and IS-SR-EF)

The solution for buildings to which two groups of people should have access independently of each other. For different purposes such as fire brigade access roads, garbage collection or doors of industrial buildings.

The fitting allows the installation of two profile cylinders for separate locking systems. The fire brigade, police, waste disposal companies or gardeners are given access via a master key, and at the same time the door can also be opened via the normal locking system.

ETS 42-R: flat height 70 mm
Our slim all-rounder, adjustable to your project requirements at no extra cost. The new low-noise electric motor drive ETS 42 completes our ETS family at ECO Schulte and now also brings the well-known USP to the fire door up to 150 kg.

• ETS 42-R (2-4) according to DIN 18263-4, BAG from DIBt, EN 16005
• Flat construction height of 70 mm and integrated installation plate
• Settings parameters, configuration and error diagnosis via integrated display with joystick
• Full power, low energy, servo, push & go